Greasable bushings - an absolute success!

New! Orkel gives 5 years warranty on bushings, up to50.000 bales.

• Well known technology, better and more economic solution.
• Price, life time and maintenance will turn into reduced costs by using
  bushings compared to traditional bearings.
• Occasional damages of a bushing will not demand an immediate need for
  replacement.
• Bushings are more robust concerning vibrations, pressure and pollution.

Robust pressrollers ensure long lifetime

• GP 1260 rollers are made up with an aggressive profile. This ensures both
  rotation of slippery material and provides a good compression of the bale.
• The rollers profile, in combination with metal sheet thickness and -quality,
  results in high stability and a long lifetime.
• Roller shafts with large diameter.
• Robust discs inside the roller and high quality welding.

First round baler with automatic bushings- and chain lubrication as standard

Bushing greasing:

• The operator is totally free from demands for greasing. Especially
  contractors will appreciate this function - avoiding expensive downtime.
• Continuous supply of grease avoids dirt penetrating the bushings.
• The consumption of grease will be approx. 50% compared with manual
  greasing.

Chain lubrication: Each time the chamber opens, the chains are supplied with oil
through brushes. Proven pick-up and chopping device - now with 20 knives

• Knives of high quality are spring tensioned to avoid damage.
• The material is chopped in a theoretical length of 54 mm.
• Pick-up working width of 2,1 m.
• The rotor of the chopping unit has special robust infeeders, made to resist
  bending out sideways. The infeeder provides a precise chopping by forcing
  the material over the knife-edge. This is the reason for the GP 1260 being
  known as the chopping baler.

Smart and clear net tying system

• A logical and uncomplicated system provides a secure and well performed
  net tying. The system handles all types of net.
• An electrical motor runs the system.
• The same rubber roller is responsible for feeding and braking of the net.
• A sharp heavy knife ensures safe cutting of the net.
• An extra net roll may be placed next to the net roll in operation. In a very
  simple way, the extra roll may be released and slide into operating position.

Bale density - on the topp

• To get high bale density, the GP1260 contains 18 rollers with a diameter of
  20 cm.
• The high number of rollers and the small roller diameter performs a heavy
  treatment of the baled material, which results in a high bale density.
• Chamber construction combined with well-stabilised cross sections between
  the walls supports this effect of high bale density.
• Mechanical closing of the chamber makes adjusting of the baling pressure
  easy and reliable.

Service friendly in focus

• All actual covers may be opened by simple means.
• Gas dampers hold open covers for inspection and service.
• Well-designed and uncomplicated constructions are important details to
  simplify service work and limit down time.

Extra equipment

• Big wheels are guaranty for low ground pressure.
• With a bale kicker you don't need to back the baler before releasing the bale.
• The baler is prepared for mounting attachment for additives.